banner

오디오 이펙트 시스템

2013.10.23 17:11

음향센터 조회 수:41305

모델명 API 500V 
측정기능 Audio Effects System 
보유실 스튜디오 

주 장비

API 500V

  

 20131023_170740.jpg

사양

용도

The API Model 500VPR is powered externally by a tri-polar power supply and is designed to accept API standard format 5.25" X 1.5" modules. The 500VPR is internally wired for PIN 2 hot, and comes with the API L200PS. The input/output jacks are both XLRs. The 500VPR can hold up to ten API modules. API makes several modules to fit this rack, including the 550A, 550b, 560, 525, and 512c.

 

 

  Protools HD 카드와 연결 함으로 56채널 MADI 포멧으로 시그널을 전송가능하게 한다

 

 

부속 장비

NEVE 1081R Remote Mic Preamp Rack Housing

 

 

 

 

 

    20131023_170752.jpg

  

 

 

사양

용도

Power: <40w, 100-240v auto sensing, 47-63Hz,

1.6A Anti Surge Fuse.

Audio Interface: 12 balanced circuits on a 56 way

panel mounted female Varicon.

Control Interface: 2 x 9 Pin D Type

Rack Weight: 21kg (46lb)

Rack Dimensions: Height 178mm (7”)

 Width 482.5mm (19”)

 Depth 265mm (10½”)

plus depth of mains fitting 63.5mm (2.5”)

1081 (1 slot, max 12 per rack)

Air (1 slot, max 12 per rack)

1073 (2 slots, max 6 per rack)

XLR inputs

Input Impedance: 1.2 kOhm, @1kHz

Gain: +20 to +70 in 5dB steps

Distortion: not more than 0.07% for 20dBm output from 50Hz to 10kHz @ 60dB gain

Microphone Maximum

Input Level with 'pad' in: +24dB

Max Output: +26dB into 600 ohms

Output impedance: 50 ohms +/-5%@1kHz, balanced

 

 

 

 

 

 

 

미세한 마이크 신호를 증폭하여 DAW혹은 콘솔에서 컨트롤을 하여 원하는 소리로 출력하게 한다

부속 장비

Manely MU-Variable Compressor Limitter

 

 

 

 

 

 

 

20131023_170811.jpg

사양

용도

Manley input & output transformers with pure nickel laminations in mu-metal case with flat frequency response
20Hz-25KHz frequency response
Balanced Inputs & Outputs
Fully differential all-tube circuitry using one each 5670, 5751, 7044, & 12AL5 per channel
Independently regulated B+ and Heater supplies
Hard-wire Bypass switch
Silent conductive plastic input attenuator
Recovery 5 steps: 0.2s, 0.4s, 0.6s, 4sec., 8sec. (Not a 12-step recovery)
Variable Attack: 25msec-70msec
Continuously variable Threshold
Switch for Limit or Compress modes
Front panel mounted Meter Adjust
Limit (4:1 to 20:1) or Compress (1.5:1)
Large Illuminated Sifam Meters
Stereo Link Switch
Maximum gain: 35 dB
<0.1% THD @ 1KHz Noise floor: -85dB typical
Max. output +30dBm (26Vrms) 26dB Headroom
Power consumption (120/240VAC): 80 watts
Dimensions: 19" x 3 1/2" x 10" (occupies 2U)
Shipping weight: 23 lbs.

 

 

 

 

 

 

 

 

-10dbv 언발란스 신호를
과도한 왜곡을 방지하거나 혹은 overload에 의해 loudspeaker가 손상되는 것을 방지하기 위하여 사용한다. solid state amp 를 사용한다.

부속 장비

Universal Audio 1176LN

 

 

 

 

 

 

 

 

 

 

 

20131023_170822.jpg

사양

용도

Ultra fast attack time -20 microseconds to 800 microseconds
Class A line level output amplifier
Custom built Putnam-designed output transformer
Stereo interconnect operation
Hand-built in USA; backed by 1-year limited warranty
Input Impedance : 600 ohms, bridges-T control (floating)
Output Load Impedance :600 ohms, floating, damping factor 20
External Connections
Jones Barrier terminals and XLR connectors
Frequency Response :
± 1 dB 20 Hz to 20kHz
Gain : 50 dB
Distortion :
Less than 0.5% total harmonic distortion from 50 Hz to 15 kHz with limiting
Signal to Noise Ratio : Greater than 70 dB at +10 dBm
Attack Time : 20 microseconds to 800 microseconds
Release Time : 50 milliseconds to 1.1 seconds
Stereo Interconnection : via 1176 SA Network accessory
Meter : dB gain reduction and dB output
Power Requirements : 120/240 V
Environmental : Maximum operating temperature 160
°
F
Dimensions : 19" Rackmount chassis, 2U
Weight (unboxed) : 11 lbs

 

 

 

 

 

 

 

 

 

 

 

 

-10dbv 언발란스 신호에 의한 과도한 왜곡을 방지하거나 혹은 overload에 의해 loudspeaker가 손상되는 것을 방지하기 위하여 사용한다. solid state amp 를 사용한다.

부속 장비

Direct Box Manely All tube DI